Akwatin Haɗin Rana Mai Aiki Mai Kyau don Ingantaccen Inganci

Takaitaccen Bayani:

√ Alamar DONGKE
√ Asalin samfurin HANGZHOU, CHINA
√ Lokacin isarwa KWANA 7-15
√ Ƙarfin wadata 90T/Wata
Kayan (rigar walda mai rufi da tagulla) ya dogara ne akan girman Faɗi*Kauri: 1.5*0.2 mm (kuma yana iya zama 1.5-2.5mm * 0.08-0.25mm azaman zaɓinku),
Ana sayar da shi kamar yadda aka buƙata, 2kg a kowace murabba'i.
Idan kuna son siyan adadi ko ƙasa da haka, don Allah ku tuntube mu, za mu gyara muku farashi da farashin jigilar kaya.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayani

Fasaloli da Aikace-aikace:
Kayan (rigar walda mai rufi da tagulla) ya dogara ne akan girman Faɗi*Kauri: 1.5*0.2 mm (kuma yana iya zama 1.5-2.5mm * 0.08-0.25mm azaman zaɓinku),
Ana sayar da shi kamar yadda aka buƙata, 2kg a kowace murabba'i.
Idan kuna son siyan adadi ko ƙasa da haka, don Allah ku tuntube mu, za mu gyara muku farashi da farashin jigilar kaya.

Game da PV busbar Ribbon

Ribon PV ya ƙunshi ƙarfe da ƙarfe mai rufi, kuma an raba shi zuwa ribon Tabbing Ribbon da kuma ribon sandar Bus.
Ribbon ɗin Tabbing: yawanci yana haɗa ɓangarorin da suka dace da kuma waɗanda ba su dace ba na ƙwayoyin halitta a jere.
Sandunan bas Ribbon: yana da ma'aunin tattarawa tantanin halitta a cikin akwatin haɗuwa kuma yana watsa wutar lantarki.

ƙayyadaddun bayanai

1) ribon walda don babban panel ɗin hasken rana mai ƙarfi:

Tushen jan ƙarfe	injin gyaran jan karfe na Park (layin TR) ko kuma yanke tef ɗin jan karfe na T2
Juriyar sinadarin jan ƙarfe	ρ ≤ 0.0172Ωmm2 / m
Haɗin Solder	62% Sn36% Pb2% Ag; 60% Sn40% Pb; 96.5% Sn3.5% Ag (Bi zaɓi ne)
Kauri na layin tin	10μm-40μm, kayan aiki na gefe
Bambancin kauri	≤ 0.008
Bambancin faɗi	Kayayyakin da aka birgima ≤ 0.1mm; yanka Kayayyaki ≤ 0.005mm
Ƙarawa	yanayin laushi ≥ 20%; yanayin laushi mai rabi ≥ 15%
Bayani dalla-dalla	faɗi 1.5mm-2.5mm; kauri 0.08mm-0.25mm. (ga 1.5*0.2mm)
Marufi	kwali, ƙafafun "Na siffanta", akwati
Ya dace da na'urar hasken rana ta DIY da kuma na'urar hasken rana, kuma ya dace da na'urar walda ta atomatik ba tare da yanke kai ba; amfanin gona ga abokan ciniki L

2) ribon walda don allon hasken rana na epoxy da sauransu ƙaramin allon hasken rana:

Yanayin Ajiya da Tsawon Lokacin Shiryawa

Ya kamata a adana kintinkirin tagulla da aka yi da gwangwani a cikin ɗaki busasshe kuma mai iska, inda bai kamata a sami sinadarin acid, alkail, ko iskar gas mai cutarwa ba, kuma danshi na cikin gida bai kamata ya wuce kashi 60% ba, a ajiye shi a kwance yayin da ake tara shi, a guji fitar da kwalin da kuma sanya shi a tsaye, yayin da adadin samfuran iri ɗaya bai wuce layuka biyar ko tan 1 ba. Tsawon lokacin shiryawa zai iya kaiwa har zuwa watanni shida tun daga ranar da aka samar.